Tag Archives: template

Using the Createspace cover template with Corel X8

This post is a bit premature as I haven’t yet shown you how to find the exact number of pages of your manuscript, but…I’ll do it now while it’s fresh in my mind. So, here goes. To create the cover, you will need:

  • the trim size of your finished book – i.e. the finished size you want the book to be. Mine is 5.5 x 8.5. You’ll find info. on trim sizes here.
  • the number of pages you end up with when you pour your manuscript into the appropriate trim size template – i.e. with the margins, etc., preset by the template.
  • and some kind of graphics package. The one I use is Corel Draw X8.

Finally, you will need the Createspace cover template for the trim size of your choice:

You can find the ‘Build Template’ here:


To use the Build Template, simply select the trim size of your book from the drop down list like so:

Then type the total number of pages into the box for ‘Number of Pages’ and click the ‘Build Template’ button. The little app. does its thing, and in a moment you should be looking at something like this:

Click the ‘Click here to begin Download’ button and save the file to your computer. As the file is a compressed zip file, you will need a program to unzip it. Most people use Winzip. I prefer a non-Microsoft product called PowerArchiver. Whichever product you use, the file will be unzipped to look like this:

5.5×8.5_BW_230 is the name of the unzipped cover template and it comes in two versions – pdf or png. As I don’t have an app that works with pdf files, I imported the png version of the file into Corel X8.

This is what it looks like:


The instructions for using the template start with ‘Create a new layer in your image editing software. This layer will serve as the design layer.’ In other words, keep the cover guide separate from the graphic you build on top of it.

This is good advice as you don’t want to accidently meld the guide and your cover, with potentially drastic results. Nevertheless, I didn’t use the layers in that way. After tracing the dimensions of the cover template, I superimposed the tracing over my background image and worked with the tracing on the same layer as everything else. That’s what the faint white line is on the cover:


I could have used the guidelines in X8, but at one point I had so many of them all over the place, it would have been impossible to see what I was doing. Now I just have to remember to delete the guidelines before I send the image off to Createspace. [And boy do I hope I haven’t just jinxed myself!]

I hope you’ve all had a pleasant weekend,



Corel Draw X8 – Miira cover final

I thought that X8 would be X6 with a slightly different interface, but it does actually have some nice features that I wasn’t expecting – like links to some very sophisticated fountain fills and a much improved transparency feature. Those features may have influenced the rather radical changes I’ve made to the cover of the first book:

Unfortunately, the image doesn’t quite show the depth of colour in the cover as the CMYK black has come through as a rather washed out charcoal in RGB [for web display]. Once the cover is printed it will be much sharper and the silvers will ‘pop’ more…I hope. Anyway, I’ll probably fiddle with the balance a bit longer, especially if you guys point out things I’m too blind to see, but this is basically the front and back cover spread that will go to Createspace for the print version.

One of the hardest things to figure out was what to put on the spine. Once I’d worked out the total number of pages for Miira, including copyright, Afterword, etc., I plugged the number into Createspace’s calculator, and it spat out the exact size the spine must be. Unfortunately, as the first book is quite ‘slim’ there’s not that much real-estate to work with.

I experimented with a number of fonts, but none gave me the crisp look I was after. And then, as I looked at the circuit board, I suddenly realised that I had all the components from which to make my own ‘font’, one that would mimic the wiring of the circuit board. Thank goodness, the end result didn’t turn out to be too kitsch. The new look circuit board also gave me the pattern for the back cover blurb. Making the text fit, however, was another exercise in patience.

And finally, a word about the new background photo. I was all set to use the bush sunset photo I’ve shown you before when I found a pic I’d taken ages ago of my own backyard:


I was trying to capture the amazing play of light through the trees and fluked it. The shot is nowhere near perfect, and I haven’t touched it up in any way – I don’t know how – but I instantly knew it would give me the feel I’d been searching for. Pretty happy with the result but annoyed at myself for wasting time and money on the bush sunset pic. Ah well…

I promise to do a how-to post about the Createspace calculator as soon as my eyes uncross. 🙂




Self-publishing via Word and Createspace – page setup

This is the second post in this series and this time, I’ll be showing you how to setup your Word document to match the Createspace template for your chosen trim size. If you’ve forgotten about templates and trim sizes, you can find the post explaining what they are, why you need them and where to find them…here.

Right. So in this post I will assume that:

  1. you have typed up your manuscript in Word or in a Word compatible format – e.g. Rich Text Format or .rtf for short.
  2. you want to change that manuscript to make it compatible with Createspace so the printing process goes smoothly
  3. you have decided on a trim size
  4. you have downloaded the appropriate template [from Createspace] specifically for that trim size
  5. you have looked at the template but did not change any of the settings

If any of these assumptions are incorrect, please go back to the overview article linked above and make sure you have everything that you need.

How to easily change the font and font size to match the Createspace template [of your choice]

The first step is to open Word. Then, open both your manuscript and the template document. The template document will look something like this:

I chose a trim size of 5.5 x 8.5 so this is the template for that trim size. Garamond is a common font, and 12 is an average font size. Your template may be different. One thing, however, is most most certain to be true – the font in the template will not match the font you used in your manuscript. Assuming you want to change the font in your manuscript, the following is the simplest, easiest way to do it. But…be warned before you begin – this method will change your title and chapter headings as well.

First, we have to select the entire document. There are two ways of doing this.

The first way is to hit the Ctrl key and the ‘a‘ key at the same time. Ctrl-a is a keyboard shortcut and will ‘select all’ on most apps.

The second way is to use the ribbon:

Microsoft Word 10 uses tabs so the ‘Select’ options are on the Home tab, at the top right of the ribbon as shown. Click ‘Select’ and then click ‘Select All’ from the dropdown options.

Your manuscript should now look like this:

WARNING: hitting the ‘Delete’ key or the spacebar when everything is selected can lead to the loss of your entire document. If you make a mistake and everything disappears, DO NOT PANIC. Simply click the ‘Undo’ button to cancel whatever you last did. The ‘Undo’ button can be found here:

You can also undo your last action by hitting Ctrl Z [Ctrl and ‘z’] on your keyboard.

Moving on. With the entire document highlighted as above, click the small arrow next to the font box as shown:

Select the appropriate font for your template. For mine it was ‘Garamond’.

With the document still highlighted in blue [i.e. selected] click the small arrow next to the font size box as shown:

Click on the appropriate font size and then click inside your document to de-select it. The blue highlighting should disappear.

The next change we will make is to adjust the alignment and first-line indent of each paragraph. To do this, click the small button in the Paragraph category on the Home tab of the Ribbon:

You should now be looking at the Paragraph dialog box as shown below. Here, you can specify how all the text in the document is aligned. As most books are justified, that is the option I’ve chosen under ‘General’. I’ve also chosen a first-line indent of 1 cm so that everyone can easily see where a new paragraph begins. This is important, imho, as I’ve also chosen ‘Single’ line spacing.

Finally, I’ve clicked on the option ‘Set as Default’ down at the bottom. Word then wants to know what I mean by default. Choosing ‘All documents…’ would change the Normal style for every Word document I create from here on in. I don’t want to do that so I selected ‘This document only’.


Click on ‘OK’ and you will notice that…nothing has changed!

Don’t panic. In reality, the Normal style has changed, we simply have to tell Word to reflect those changes in the document. To do this, Select All again, and when the whole document is highlighted in blue, click the Normal style as shown:

Ta dah…the first big change is complete. The headings still need to be fixed up but that can wait. The next thing we need to do is change the size of the ‘paper’ so that we can start to see roughly how many pages this document really contains.

Changing the paper size to reflect the trim size of our ‘book’

To find out what is the correct paper size for our book, open the template document. Then open the ‘Page Layout’ tab of the Ribbon. With the Page Layout tab open, click the small button under the Page Setup group of functions:

You should now be looking at the Page Setup dialog box for your template. Under ‘Paper size’ you should have a number in cm for width and height. Write those 2 numbers down. Then click on the Margins tab. Again, you should write the margin numbers down and note whether ‘Mirror margins’ are specified. The following screenshots are from my template:

Now, go back to your own document, open the Page Layout tab and click on the small button to open the Page Setup dialog box. You should be looking at the tab for Paper. Click inside the ‘Paper size’ boxes and type in the dimensions that were shown in the template document. Mine looks like this:

Next, click the Margins tab and again, type in the numbers you found in your template. Mine looks like this:

Congratulations! You’ve changed some of the most important aspects of your manuscript to reflect the Createspace template.

But there is still a great deal to do. The Title and Headings will have to be fixed and to do that we will change the default styles to make the changes quick and easy. The book will also need page numbering, but some parts should not have page numbers – e.g. the Title page – so first we will have to insert section breaks. As well as making sure the page numbering is correct, section breaks are necessary to ensure that the first page of every new chapter always starts on an odd page. Nothing shrieks ‘amateur’ in a print book like wonky formatting.

And finally, there’s the cover. Front page + back page + THE SPINE! Plus ISBNs, pricing, royalty calculations….

I hope you guys are in for the long haul as this could take a while. 🙂




%d bloggers like this: