Tag Archives: Spring

Apples, alpacas and some results

First and foremost, to all those who re-blogged and retweeted my ebook free promotion over the last two days…THANK YOU! There were 40 downloads and I’m grateful for each and every one. 🙂

And now to soothe my frazzled nerves and yours, I thought I’d show you what else I’ve been up to:

Exhibit 1 – one of the alpacas that mows my grass, strips my rose bushes and turns my fruit trees into umbrellas

You may also notice that there’s not much grass on the ground. This time last year, the two alpacas would have been chewing through knee high growth. It’s been dry, very dry.

Exhibit 2 – the apple tree inside the new fence

I got  a bit artistic with this shot. 🙂 The metal framing the picture is actually the reo ‘gate’. More on that in the next shot.

This whole project started because I was determined to save the apple tree from the alpacas. Most of my fruit trees are tall enough to survive having all their lower branched pruned into an umbrella shape by the ‘girls’. The apple, however, is kind of a dwarf, and I made the mistake of planting it too close to the fence. As a result, even when the alpacas are locked out, they just reach over the barbed wire and nibble away [that’s why there’s new growth in the middle of the apple tree but not on the ends of the branches].

The first step, therefore, was to put wire mesh above the fence. To do that, I had to hammer some star pickets into the ground and then screw another star picket half way up to increase the combined height [star pickets have holes along one flange so if you marry up the holes you can screw them together]. Then the wire was attached to the ‘posts’.

You can see how the star pickets are attached in Exhibit 3.

Exhibit 3 – the fence

The grid of metal wired to the star pickets is the ‘gate’ leading into the fenced off area. The grid is called ‘reo’ by tradies, but it’s official name is ‘reinforced wire mesh‘. Reo is used to reinforce concrete as it’s being poured. The heavy duty variety is also rigid enough to make an excellent gate. And that’s what I did. Haven’t quite finished so the gate is just wired shut for now.

Exhibit 4 – the enclosure

This last pic just shows the wire enclosure around the apple tree. If you look closely you can see the doubled up star pickets and wire mesh.

Apple tree 1, alpacas 0. -fist pump-

My hands are covered in bandaids and my back hurts, but seeing the apple tree burst into green makes it all worthwhile.

cheers from Warrandyte!

Meeks

 


Melbourne – wind direction

Just checked the VicEmergency website and took this screenshot of the wind-direction[s] around Melbourne at the moment:

The little arrows indicate where the wind is coming from, and where it’s going to. The bottom of the picture is ‘south’ so you can see that in the lavender coloured areas down the bottom, wind direction is a steady ‘south easterly’ – i.e. coming from the south and east. In the pale areas, however, the wind is all over the place. Literally.

Why bother with wind direction?

Because you need to know whether a bushfire is being blown towards you or away from you.

To see the wind direction overlay on the VicEmergency map, click the Filter option as shown:

This will open a drop down list. Scroll down the list and click ‘wind direction’. This will display the lavender map at the top of this post.

To get rid of the wind direction overlay, open the Filter menu again and select ‘None’.

If you’re looking at the VicEmergency app on your phone, you have to tap your watch zone first. Once it opens, the Filter option is located up the top on the right-hand side of the screen [next to the ?].

Tap Filter and select the option for wind direction as for the website.

Given how dry and horrible this Spring has been, I think I’ll be keeping that wind direction overlay on at all times.

Stay safe,

Meeks


%d bloggers like this: